BackBack

Parasound - Hint 6

AED 15,200.00

HINT 6 Features Burr Brown analog resistor ladder volume control Dimmable front panel volume display Updated USB receiver is Plug and play with Windows 10 and MAC An additional optical input...

Description

HINT 6

Features

  • Burr Brown analog resistor ladder volume control
  • Dimmable front panel volume display
  • Updated USB receiver is Plug and play with Windows 10 and MAC
  • An additional optical input (2 total)
  • Ball bearing supported solid aluminum volume knob
  • Programable default turn on volume setting
  • Favorite volume memory with remote control button
  • Increased phono stage gain for lower output cartridges
  • Improved Left/Right channel separation and balance tracking
  • Updated cosmetics with subtle gold highlights

Preamp and DAC Features

  • ESS Sabre32 Reference DAC (ES9018K2M)
  • Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
  • USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD
  • Coax and optical inputs accept PCM up to 192kHz/24-bit
  • Analog bass management with high & low pass crossovers
  • Home theater bypass input for surround sound integration
  • Front panel subwoofer level control
  • Dedicated high current headphone amplifier (TI TPA6120)
  • Phono input for MM, MC and MI with 100 Ω or 47k Ω load
  • Front panel Aux input with automatic +12 dB gain stage
  • 5 pairs RCA line level Analog inputs
  • 1 pair XLR balanced Analog input
  • Balanced XLR and RCA left and right preamp outputs
  • 1 balanced XLR and 2 RCA subwoofer outputs
  • Bass & treble controls with relay bypass from remote or front panel
  • Rear panel IR input and IR loop output jacks
  • 12 Volt trigger output
  • Back-lit remote control with discrete buttons
  • 5w standby power consumption meets Energy Star & EU specs

Power Amp Features

  • 160 Watts x 2 @ 8 Ohms (RMS, both channels driven)
  • 240 Watts x 2 @ 4 Ohms (RMS, both channels driven)
  • Power amp circuit topology designed by legendary John Curl
  • Direct amplifier input to bypass preamp section
  • High bias class A/AB operation
  • Oversized shielded toroid power transformer
  • Dual-mono power supply and power amplifier
  • 40,000uF power supply filter capacitance
  • Matched JFET input stages and MOSFET driver stages
  • 12 high voltage/high current bipolar output transistors
  • Heavy-duty 24k gold-plated 5-way speaker binding posts
  • Over temp and short circuit relay protection

SPECIFICATIONS

Power Output - Both channels driven 

 

  • (0.9% THD, 20 Hz - 20 kHz) 
  • 180 watts x 2 @ 8 Ω RMS 
  • 270 watts x 2 @ 4 Ω RMS

Current Capacity

45 amps peak per channel

Frequency Response 

 

  • 10 Hz - 100 kHz, +0/-3 dB 
  • 20 Hz - 20 kHz, +0/-0.5 dB

Total Harmonic Distortion (THD) 

 

< 0.01 %, average listening levels 

< 0.05 %, 160 watts x 2 @ 8 Ω

Interchannel Crosstalk 

 

> 70 dB at 20 kHz 

> 78 dB at 1 kHz

Signal to Noise Ratio - IHF A-weighted 

 

  • Line in: - 103 dB (input shorted) 
  • Digital in: - 106 dB

Amplifier Damping Factor 

 

> 800 at 20 Hz

Preamplifier Stage Input Sensitivity

 

300 mV in for 1 V at Preamp Output jacks

Total Preamp Stage Gain: 10 dB

  • Max Output Unbalanced: 7 V
  • Max Output Balanced: 9 V

Power Amplifier Stage Sensitivity 

 

1 V at Bypass/Amp In for 28 V at Speaker Out 

Total Amp Stage Gain: 28 dB

Phono Stage Sensitivity / Input Impedance 

 

  • MM: 41 dB / 47 k Ω 
  • MC: 54 dB / 47 k Ω or 100 Ω

High & Low Pass Crossover Slope 

 

12 dB per octave

Supported DAC Sampling Rates 

 

USB: up to 384 kHz / 32-bit PCM 

DSD Native: DSD 64, DSD 128, DSD 256 

DSD over PCM (DoP) at 384 kHz

Coax/Optical

Up to 192 kHz / 24-bit PCM

Digital to Analog Converter 

 

ESS Sabre32 Reference ES9018K2M 

384 kHz / 32-bit

USB 2.0 Controller

Savitech SA9227, 384 kHz / 32-bit

Headphone Amplifier

Texas Instruments TPA6120A

Output Impedance 10 ohms

XLR Pin Identification

1 = Ground (Shield) 

2 = Positive 

3 = Negative (Return)

Input Impedance

 

Unbalanced: 24 k Ω

Balanced: 100 k Ω per leg

Preamplifer Output Impedance 

 

Unbalanced: 100 Ω 

Balanced: 470 Ω per leg

Dimensions

  • Width: 17-1/4" (437 mm)
  • Depth: 16-1/4" (413 mm)
  • Depth, with cables 17-1/4" (437 mm)
  • Height, with feet: 5-7/8" (150 mm)
  • Height, without feet: 5-1/4" (133 mm), 3U

Net Weight 

 

33 lb. (15 kg)

Shipping Weight 

45 lb. (20.4 kg)

Power Requirement 

 

Standby: 0.5 watts 

Idling power: 70 watts 

Maximum: 750 watts 

110-125 VAC 60 Hz or 220-250 VAC 50 Hz 

AC mains voltage is set on rear panel

Shipping & Delivery

What are the delivery charges?

Auratech.ae provides Free Delivery for all items within UAE if your total order amount is more than AED 1,000/-. If your order is less than AED 1,000/-, a flat shipping charge of AED 50/- will be applicable.

What is the estimated delivery time?

If the item is in stock, it will be delivered in 7-10 days from the order date.

How will the delivery be done?

We send all packages via reputed couriers firms.

How do I track my shipment?

We notify our customers via a shipment confirmation email within 24 hours of dispatching the product(s). This shipping confirmation email will have the couriers’ tracking number and the link for tracking.