ZoneMaster 2
FEATURES
-
- 120 watts x2 @ 8 Ω
- 150 watts x2 @ 4 Ω or 2 Ω
- 4 speaker connections (A and B outputs for both channels)
- High current for stable operation at 2 Ohms
- Class AB input stage plus premium Class D power stage
- Audio sensing auto-on trigger
- 12 volt auto-on trigger input
- Looping 12 volt trigger output
- Speaker level input for expanding systems w/out pre out jacks
- Looping output to connect additional amplifiers
- Mono mode combines L and R for single speaker applications
- Separate level controls for both channels
- Detachable speaker connectors accept up to 12 gauge wire
- Short circuit and overheat protection with front panel indicators
- 0.5 watt standby power consumption meets Energy Star & EU specs
ZoneMaster 2 Specific Features
- Compact 1u, 1/2 width chassis size
- "ZRK" Rack mount kit sold separately (click to view)
- Full Range Mono RCA Output
- 80Hz low pass Mono RCA output (for sub)
- Built in 80Hz low pass filter in bridged mode for driving in-wall/in-ceiling woofers or passive sub(s)
SPECIFICATIONS
| Power Output RMS, All Channels Driven (20 Hz - 20 kHz) |
|
| Frequency Response | 20 Hz - 20 kHz, +0/-0.25 dB |
| Total Harmonic Distortion | < 0.05% at typical listening levels < 1.0% at full power |
| Interchannel Crosstalk | 70 dB at 20 kHz |
| Input Sensitivity | 700mv = Full output (50 Watts @ 8 Ω) Total Gain = 29 dB (Level controls set to Maximum) |
| S/N Ratio | > 112 dB, input shorted, IHF A-weighted |
| DC Trigger Requirements | +9 Vdc to +12 Vdc, 2 mA |
| Audio Trigger Requirements | 2 mV Audio Signal |
| AC Power Requirement |
|
| Dimensions | Width: 8.5" (220 mm) |
| Weight |
|