GOLD FX
Amazing as it may seem, the Gold FX's slim wall-hugging profile incorporates no fewer than six drivers.
In monopole mode for discrete side or rear sound channels its front-firing 61/2" RST bass/mid-driver and C-CAM ribbon transducer deliver accurate ultra-wideband sound to match the tonal balance of any 'Gold' speaker combination.
In dipole mode the Gold FX uses two pairs of side firing 4" C-CAM bass/mid drivers and 25 mm C-CAM gold-dome tweeters, combined with the tailored output from the front-firing bass/mid driver to provide wonderfully diffuse yet tonally precise surround effects. The Gold FX can be flush-mounted on side or rear walls. Installation is made easy by the inclusion of a 'sloppy fit' wall bracket, which allows levelling and adjustment prior to fixing.
Technology
- C-CAM (Ceramic-Coated Aluminium/Magnesium) ribbon transducer design – providing extension to a class leading 60 kHz
- Single bolt through driver fixings for improved bracing, rigidity and driver/baffle de-coupling
- C-CAM RST (Rigid Surface Technology) drivers
- Die-cast alloy terminal panel arrangement with high quality bi-wire terminals and high end spade type link cables
- Pureflow silver internal cabling
- Selected premium quality wood veneer or high gloss lacquer finishes
- Rigid 20 mm MDF construction throughout, employing radial and cross-bracing techniques for high rigidity resulting in low cabinet colouration.
SPECIFICATIONS
| System Format | 2-Way |
| Frequency Response | 60 Hz — 60 kHz |
| Sensitivity (1W@1M) | 87 dB |
| Nominal Impedance | 8 ohms |
| Maximum SPL | 110.8 dB |
| Power Handling (RMS) | 100 W |
| Recommended Amplifier Requirements | 50 — 100 W |
| Bass Alignment | Sealed Cabinet |
| Crossover Frequency | BiPole: 2.3 kHz DiPole: 2.6 kHz |
| Drive Unit Complement |
|
| Cabinet Dimensions (H x W x D) | 310 x 390 x 160 mm (1213/16 x 153/8 x 65/16") |
| Complete Dimensions (Including Terminals (H x W x D)) | 310 x 390 x 168 mm (1213/16 x 153/8 x 65/8") |
| Weight (each) | 11.9 kg (26 lb 2 oz) |