Definitive Technology Descend DN10 Subwoofer
DN10’s unique 3XR™ Architecture means it delivers all the bass you need and then some, performing significantly louder and clearer than other 10” subwoofers.
- 10" Long-Throw Woofer
- Dual 10" Passive Radiators 3XR™ Configuration
- As Low As 28Hz (+/- 3 dB)
- Class D Digital Amplifier
- Back Panel Controls
Deep Impact
Descend’s unique 3XR Architecture provides triple the bass-producing radiating surface area of a traditional ported subwoofer. This extra surface area moves more air, resulting in massive low end. And because 3XR doesn’t use ports, it also provides crystal-clear sound with no port noise distortion.
Loud & Clear
As the core technology behind Descend’s 3XR Architecure, its passive bass radiators enable the DN10 to play as loud and low as a 12” ported sub without unwanted port noise distortion. Passive radiators also deliver a smooth frequency response like a sealed sub, but with the port-like ability to play louder and lower in a smaller enclosure.
More Bass
The custom amplifiers used in Descend Series subwoofers were designed to get the most out of Descend’s unique 3XR™ Architecture. Optimized for efficiency and a strict avoidance of distortion, Descend’s amps deliver consistently dynamic performance with the ability to push hard for maximum impact when needed.
As the core technology behind Descend’s 3XR Architecure, its passive bass radiators enable the DN10 to play as loud and low as a 12” ported sub without unwanted port noise distortion. Passive radiators also deliver a smooth frequency response like a sealed sub, but with the port-like ability to play louder and lower in a smaller enclosure. What you get is the best of both worlds: louder, clearer bass than a ported sub from a smaller enclosure than a sealed sub.
Because the DN10 Class D amplifier is so efficient, little power is wasted as heat, and its entire output is dedicated to providing significantly smoother bass and greater impact. This allows the DN10 subwoofer to blend naturally into any audio system while producing greater volume and significantly deeper impact than competitive designs.
You can customize the DN10 to the needs of your application, system and space. The DN10 features built-in controls for variable volume, low pass filter and phase (0/180°) for optimum bass levels and the ability to customize it to the specific needs of your system.
SPECIFICATIONS
| Enclosure | Passive Radiator |
| Video Shielded | No |
| Woofer Size (inches) | 10 |
| Woofer Composition | Polymer |
| Firing Direction | Front |
| Low pass control | Potentiometer w/ center detent |
| Speaker-Level Inputs | Yes |
| Speaker-Level Outputs | Potentiometer w/ center detent |
| Low-Pass Crossover Freq | 60-120 Hz |
| High-Pass Crossover Freq | 80 Hz |
| Phase Switch | 0 / 180° |
| Amplifier Type | Class D |
| Frequency Response | 28 - 200 Hz |
| Dimensions (inches) | 16.8” x 16.0” x 17.1” |
| Warranty | Drivers 5 years. Amplifier 3 years |